Airtac Modify PP2k to MP5 HPA Adapter
Airtac Modify PP2k to MP5 HPA Adapter is backordered and will ship as soon as it is back in stock.
Includes single stack adapter and HPA adapter only. Designed and tested around CYMA Mid-Cap MP5 mags. Designed to be fitted to the short PP2k gas magazines.
Couldn't load pickup availability
Want to know when back in stock?
Interest Free Finance
Interest Free Finance
We accept Klarna and PayPal Pay-in-3.
Delivery and Shipping
Delivery and Shipping
Free shipping for all orders over £100.
Orders are shipped Monday, Wednesday, Thursday and Friday
Cut off time 14:00 all orders are send 1-2 days for UK Mainland
Description
Description
Includes single stack adapter and HPA adapter only. Designed and tested around CYMA Mid-Cap MP5 mags. Designed to be fitted to the short PP2k gas magazines.
Assembly
1) Unscrew the three screws in the bottom of the magazine. Remove the gas plate, spring and follower.
2) Insert the single stack adapter into the gas magazine
3) Fit the gasket to the Airtac HPA adapter ( at this stage you can apply a large amount of silicone oil to the gasket to aid insertion. Its a tight fit to ensure good seal )
4) Place the HPA Adapter into the magazine. Screw the screws back in, tightening the rear screw in first, and then the two side screws in small increments. Do not over tighten.
6) Go have fun!
MP5 HPA Adapter Info
- Replaceable Feed Tube
- Replaceable Feed Tube
- Compatible with all CYMA MP5 Mid Caps (65 round metal, 120/130 round metal, Straight, Novritsch Straight, Bullet Window).
- Straight Magazines will follow grip of pistol/SMG
- Small rear tabs can be filed down to accomodate out-of-spec magazines (shown in blue on image below)
- BB Retention drops only 2 BBs when changing magazine
- Magazine Insertion will be tight for first few insertions, this is to provide perfect fit
