Jefftron Micro mosfet II with wiring

Professionally made mosfet designed for airsoft electric guns (AEG). The device increases the gun rate of fire and battery last longer than with basic wiring. SPECIFICATIONS: - Very small device dimension, it fits nearly everywhere - Presoldered wires to allow faster and easier installation into the gun, it is long enough for all kind of weapons. Simply cut wires to the required length and attach connectors (included in the package) - On the devices are soldered high quality 2 black wires 1,5 qmm (AWG16) with silicone insulation, length 500 mm each. The blue wire 0.25 qmm (AWG24) with a length 1000 mm is used for connection anywhere on the red cable. - In the package is included 1000 mm red wire 1,5qmm (AWG16) with silicone insulation - Coated with lacquer, it protects the device against water - If you want to use your own wires, choose device without wiring - Designed for springs up to M160 (equivalent for current 75A single shot fire or 25A burst fire for max. 30s). For higher load please use Mosfet II - Specified for common batteries up to 17V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V) - 5 wires connection - The positive wire isn't connected into the device - Device size 15x7x5mm - No current consumption in the idle mode - No sparking on switch contacts   PACKING: - the device with wiring - DeanT connector male - 30A mini fuse - 4x faston female 2,8mm - 6x black heat shrink tube 3,2mm - length 20mm - 3x black heat shrink tube 4,8mm - length 20mm - Installation manual in English