We are open Bank Holiday Friday - April 18th / Closed Bank Holiday Monday 21st
1 2
Tokyo Marui  |  SKU: 4952839171160  |  Barcode: 4952839171160

Tokyo Marui SG553+ Electric Airsoft Rifle

£399.99
Tax included Shipping calculated at checkout.

Introducing the Sig 553+ an electric gun that can use MS Li-Po batteries! The PLUS system (FET circuit) provides high safety and improved trigger response during semi-automatic firing. Based on the standard type electric gun SIG552 Shields, the SG553 Plus has been upgraded both inside and out to a higher level of operability.

Product Specs

This Section is currently under Development

-Power Source
Battery
-Connector Type
Mini Tamiya
-Does it have Blow back?
No Blow Back
-Whats the best bb weight?
0.25g
-What Thread type does it have?
14mm CCW
-Max Battery Voltage
7.4v / 8.4v / 9.6v
-Average FPS in our tests please allow +/-10% or 20% on Gas
300 - 350fps
-What Fire modes?
Safe - Semi - Full Auto - Burst

Interest Free Finance

We accept Klarna and PayPal Pay-in-3.

Delivery and Shipping

Free shipping for all orders over £100.

Orders are shipped Monday, Wednesday, Thursday and Friday

Cut off time 14:00 all orders are send 1-2 days for UK Mainland

Description

Introducing the Sig 553+ an electric gun that can use MS Li-Po batteries!
The PLUS system (FET circuit) provides high safety and improved trigger response during semi-automatic firing. Based on the standard type electric gun SIG552 Shields, the SG553 Plus has been upgraded both inside and out to a higher level of operability.

Features:
Equipped with FET
Equipped with a switch that combines mechanical and FET. Compared to a mechanical switch only, there is less current loss at the contacts, improving the response from pulling the trigger to firing the BB bullet. The durability of the switch has also been improved.

PLUS System
Tokyo Marui developed the "PLUS System" in which a microcontroller unit (MCU) comprehensively monitors and controls the FET, battery, and motor. This system not only controls the rotation of the motor, but also detects any damage or abnormality in each part and stops operation, making it a safe system.

Increased rigidity with reinforced resin
Reinforced resin is used for the handguard and upper/lower receiver, providing increased rigidity compared to conventional resin parts.

Equipped with 20mm wide rails
Equipped with a lightweight rail handguard with mounting rails on the four sides of the handguard. In addition, a rail is also provided on the top surface of the upper receiver, allowing various optional parts compatible with rails with a width of 20 mm (Picatinny standard) to be attached.

Black Finish
The receiver, stock, grip, handguard, etc. are painted black with a low gloss finish, giving the gun a more textured and solid feel.

Flip-up Sight
The front and rear sights are flip-up types that can be folded down when using optical equipment, and the rear sight can be adjusted up and down.

Compatible with various muzzle options
Comes standard with a machined aluminium flash hider. If you remove the flash hider, you can attach a muzzle option with a 14mm reverse thread, such as a silencer.

See-through magazine
It comes with a see-through magazine that holds 40 rounds and allows you to see the ammunition through. It also uses a new follower that allows you to fire every last round.

Tokyo Marui

Tokyo Marui SG553+ Electric Airsoft Rifle

£399.99

Introducing the Sig 553+ an electric gun that can use MS Li-Po batteries!
The PLUS system (FET circuit) provides high safety and improved trigger response during semi-automatic firing. Based on the standard type electric gun SIG552 Shields, the SG553 Plus has been upgraded both inside and out to a higher level of operability.

Features:
Equipped with FET
Equipped with a switch that combines mechanical and FET. Compared to a mechanical switch only, there is less current loss at the contacts, improving the response from pulling the trigger to firing the BB bullet. The durability of the switch has also been improved.

PLUS System
Tokyo Marui developed the "PLUS System" in which a microcontroller unit (MCU) comprehensively monitors and controls the FET, battery, and motor. This system not only controls the rotation of the motor, but also detects any damage or abnormality in each part and stops operation, making it a safe system.

Increased rigidity with reinforced resin
Reinforced resin is used for the handguard and upper/lower receiver, providing increased rigidity compared to conventional resin parts.

Equipped with 20mm wide rails
Equipped with a lightweight rail handguard with mounting rails on the four sides of the handguard. In addition, a rail is also provided on the top surface of the upper receiver, allowing various optional parts compatible with rails with a width of 20 mm (Picatinny standard) to be attached.

Black Finish
The receiver, stock, grip, handguard, etc. are painted black with a low gloss finish, giving the gun a more textured and solid feel.

Flip-up Sight
The front and rear sights are flip-up types that can be folded down when using optical equipment, and the rear sight can be adjusted up and down.

Compatible with various muzzle options
Comes standard with a machined aluminium flash hider. If you remove the flash hider, you can attach a muzzle option with a 14mm reverse thread, such as a silencer.

See-through magazine
It comes with a see-through magazine that holds 40 rounds and allows you to see the ammunition through. It also uses a new follower that allows you to fire every last round.

View product
Back to top